Fitting our Bamboo wall panels typically involves using a wall adhesive e.g., no more nails, CT1 this is then backed up with our unique profile system, these hold the panels in place keeping them secure ready for your next panel/ LED profile to be fitted.

Installing our Bamboo wall panels is a straightforward process that even a novice DIY enthusiast can handle. Here’s a step-by-step guide:

Preparation:

Ensure the wall surface is clean, dry, and free from dust and debris. Measure the wall area where you plan to install the panels.

Cutting Panels:

If necessary, cut the panels to fit your wall dimensions using a saw suitable for bamboo.

When applying adhesive use a high-quality wall adhesive like “No More Nail” or “CT1”. Apply the adhesive evenly to the back of the panel.

Mounting Panels:

Press the panel firmly against the wall. Hold it in place for a few moments to ensure good adhesion.

Using the Profile System:

Our unique profile system is designed to secure the panels in place. Attach the profiles to the wall at the panel edges, ensuring they hold the panels firmly.

Adding Additional Panels:

Repeat the process for each additional panel. Make sure each panel fits snugly against the previous one.

Fitting LED Profiles (if applicable):

If you are using LED profiles, install them according to the manufacturer’s instructions. Ensure they are securely fitted and aligned with the panels.

Our panels are suitable for any space. They aren’t suitable to be fitted into shower cubicles directly but are fine to be installed in bathrooms, kitchens and any other areas.

Our panels are designed for any space. They are fire, water, and moisture resistant with a B1 fire rating. They aren’t suitable to be fitted into shower cubicles directly but are fine to be installed in bathrooms, kitchens and any other areas.

FluteSlat™ London is 628mm width x 2500mm height coverage per panel.

FluteSlat™ New York is 680mm width x 2500mm height coverage per panel.

FluteSlat™ Paris is 600mm width x 2500mm height coverage per panel.

FluteSlat™ Milan is 640mm width x 2500mm height coverage per panel.

Each panel comes professional packaged as 4 manageable slats that easily clip together to form a full panel.

Our 5mm Bamboo backed boards make them eco-friendly, flexible and lightweight.